Download Posiflex PB-2200 Hard Reset File

Till drawers
Till units may have small DIP switches (usually on the bottom of the unit). Typically there are three sets for DTR handshaking, open character and port settings.
Note: Till drawers may be 12 or 24 volt. Typically, receipt printer connect drawers (RJ11 type plug) are 12 volt but some printers provide 24 volts.

Utilities, Configuration, Till configuration
Enter the 'Receipt printer connect control sequence'.
The sequence is specific to the receipt printer, see the list below. The Epson TM T88 is: 27,112,48,55,121
Note that many receipt printers have two RJ11 sockets on the back, one for the cash drawer, the other for a pole display. Ensure the one marked DK is used for the cash drawer.

The Printer on off boxes are only used if the pole is daisy chained from a serial port receipt printer.
Do not use otherwise. The program uses them to switch off the printer then send to the display then reactivate the printer. The Epson DM-D110 codes are:
Switch printer on: 27,61,1
Switch printer off: 27,61,2
The ASCII character table is here
The pole display may have characters manually sent from the command line (Start, Run, CMD) with the ECHO command: ECHO hello>com1 (Enter key)

For printer connected (daisy chained) drawers:
Utilities, Configuration, Receipts
Select the printer

Managed to find a cheap customer display on ebay in poor but working condition. It had been stored in a bin bag in a box outside for months and posted in said box minus the spiders and bugs. It was filthy and slightly rusty but seems to work OK.

Post by Blaze89 » June 25th, 2015, 7:45 pm

Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.

You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.